نوشته شده توسط : anamariaceuhp52

Customer problem: I have received the VAS6154 device. I install ODIS 5.1.6 on Win7/ 64 bit, but I have a problem connecting to the vehicle (all 3 devices work identically). The first time I connect to a vehicle, it recognizes the vas6154 interface. If I disconnect and reconnect the interface then the interface is no longer visible in ODIS. This appears on USB or WIFI and appears every time. After that I have to shut down ODIS and restart. I’m asking for help!!!vas6154 original vas 6154a



Autonumen.com engineer solution:

The VCX Manager and ODIS 5.1.6 software cannot be opened at the same time. If you restart the ODIS software and can connect well, it indicates that it can use normally.



:: برچسب‌ها: VAS 6154,VAS6154 Diagnostic Tool,VAS 6154 ODIS,VAS6154 ODIS, ODIS Engineering Software, ,
:: بازدید از این مطلب : 149
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : شنبه 17 مهر 1400 | نظرات ()
نوشته شده توسط : anamariaceuhp52

Project Piwis 3 PT3G => VAS6154-Kolun a look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
Obd2tool.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154




VERY IMPORTANT:

For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3 with relief!

Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche

Diagnostic test: passed

Coding: passed

Programming: passed

attached VAS 6154 driver download, installation instruction, wlan setup….



:: برچسب‌ها: VAS 6154,VAS6154 Diagnostic Tool,VAS 6154 ODIS,VAS6154 ODIS, ODIS Engineering Software, ,
:: بازدید از این مطلب : 179
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : پنج شنبه 18 شهريور 1400 | نظرات ()
نوشته شده توسط : anamariaceuhp52

There have many diagnostic interface for vag group vehicles, ODIS vs VCDS vs VCP which one is the best? there Autonumen.com will share some different for you.

ODIS is OEM, so it fully supports every VAG model, and it’s best for flashing, but it’s slow and you need online connection for being able to do a lot of things, Wifi Vas 6154 head should run faster with ODIS than 5054A

which one is best compare ODIS vs VCDS vs VCP-1

ODIS 4.2.3 Software+ODIS Engineering 7.2.2+Elsawin 5.3+Etka 7.5 Plus 5 IN 1 Software is latest vas 5054a vas6154 diagnostic software for Sale:

VCDS is super fast, best to read DTC’s and do basic stuff (diagnosis) and some simple coding, but it doesn’t work well with new MQB platform.

which one is best compare ODIS vs VCDS vs VCP-2

Vagcom 17.8 HEX CAN USB Interface VCDS 17.8.1 online update version support 16 languages

1. The product can use the official software and update online, so you can always get the newest software version( VAG COM 17.8.1 some version already update ).
2. You can get access to Internet when using this product and not easy be locked.
3. This product can support long coding,fast scanning fuctions.
4. It supports 16 Languages.( Support 16 languages, including of Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania.)
5. It supports Firmware update online ( not NEC project), always the newest version.

VCP is little bit a mix of those, best for parametring and quick eeprom read and DTC fast read
every feature (coding & programming) is done offline. VAG CAN PRO VCP 5.5.1 doesn’t need engineer codes for coding or programming ,work very well with MQB

VAG CAN PRO CAN BUS+UDS+K-line 5.5.1 VCP Replace VAS 5054A ODIS

1. Newest Version V5.5.1
2. Diagnosis Better and faster than VAS 5054A
3. supports coding and programming, NO need engineer codes for coding or programming
4. supports CAN BUS, UDS, K-line protocols
5. Support Volkswagen, Audi, Seat, Skoda, made from 1990 to 2015
6. Multi-language:English, Czech, Danish, German, Hrvatski, Italian, Dutch, Polish, Russian, Spanish
7. Operation system: Windows XP, Windows 7



:: برچسب‌ها: VAS 6154,VAS6154 Diagnostic Tool,VAS 6154 ODIS,VAS6154 ODIS, ODIS Engineering Software, ,
:: بازدید از این مطلب : 162
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : چهار شنبه 13 مرداد 1400 | نظرات ()

صفحه قبل 1 2 3 4 5 صفحه بعد